Xfinity

Program Your Xfinity Voice Remote

You can program your Xfinity Voice Remote to work with your TV and audio/video (AV) receiver, like a sound bar and other pieces of audio equipment.

Pairing Your Voice Remote With Your Xfinity TV Box

Aim the Voice Remote at your X1 TV Box or Flex streaming device, press the Microphone (Voice) button and follow the on-screen instructions.

You can also:

  1. Press the A button on your remote.
  2. Choose Remote Setup on your TV.
  3. Follow the on-screen instructions.

Once your Voice Remote is paired, follow the on-screen instructions to set up power, volume and input control for your TV and audio equipment.

Programming Your Voice Remote to Control Your TV or Audio Device

  1. Press and hold the Microphone (Voice) button and say, "Program remote." You can also get there by navigating to the Settings page, selecting Remote Settings and then Voice remote pairing

if your remote has a Setup button. Then follow these steps:

  1. Turn on your TV.
  2. Press and hold Setup until the light at the top of the remote changes from red to green.
  3. Enter 9-9-1. The light should flash green twice.
  4. Keep pressing CH ^ until the TV turns off.
  5. Once the TV turns off, press Setup to lock in the code.
  6. Press the TV power button on the remote. If the TV turns on, you're all set!

Programming Your Remote Using the Xfinity My Account App

Open the Xfinity My Account app on your Apple or Android mobile device.

  1. Tap the TV icon, pick your TV Box, and then pick Setup a remote.
  2. Swipe to find the remote control model you need to program, and tap Continue.
  3. Pick TV or Audio/Other, and follow the programming instructions.

How to Program Your Comcast Xfinity Remote control

How to Program your Comcast remote with Codes for TV

   1. Turn on the TV you are programming.

   2. Press and release the "TV" button on your universal remote.

   3. Press and hold the "Setup" button on your remote until the button blinks twice.

   4. Type in the 4-digit or 5-digit code listed below using the number buttons. Additional codes may be found in the remote manual.

Here’s how to program your remote for control of a TV or TV and AVR with Comcast Xfinity Remote XR2

Here’s how to program your remote for control of a TV or TV and AVR

1.Install the remote control batteries and make sure your TV, AVR and set-top box or DTA are powered on.

2. Refer to the “Setup Codes for TVs” and “Setup Codes for AVRs and Soundbars” sections on the back of this guide to find the manufacturers of your TV and AVR.

3. Press and hold the Setup button on your remote until the status LED changes from red to green.