You are here

Program TV with Comcast Xfinity remote codes

Simple step by step guide to program your Xfinity remote control

Use following xfinity remote codes and Comcast remote codes to program your TV with easy step by step instructions provided below, using the xfinity remote setup you can easily setup any tv, dvd, blu-ray and audio video receiver to work with xfinity remote. we have listed steps to pair TV and trouble shoot issues with pairing. 

before you start program your Xfinity remote note down the codes for your TVs brand from bleow most popular brand or goto fill list of  Xfinity Remote Code list and make note of xfinity codes.

Popular xfinity remote codes

LG 10178, 11265

Panasonic 10051, 10250

Samsung 10812, 10060

Sanyo 10154, 10159

Sony 10000, 11100

Sharp 10093, 10165

Toshiba 10156, 11156

Vizio 11758, 11756

Haier    11034, 10178, 11265, 10768 & 11009

Hitachi    11145, 10145, 12243, 12143, 11904, 11345& 11960

Philips    11454, 10054, 10037, 10690 & 11483

Sansui    10463, 11409, 11904, 11911 & 11935

Sanyo    10154, 10159
 

Don't see your TV brand in most popular TV codes, go to complete Xfinity Remote Code list 

How to Program your remote using the RF pairing:

  • Install the remote control batteries and make sure your TV and set-top box are powered on.

  • Press and hold the "Setup" button until the LED at the top of the remote changes from red to green.

  • Press the XFINITY button

  • Enter the 3 digit code shown on your screen

  • Program your remote using a code:

  • Turn on the TV you are programming.

  • Press and hold the "Setup" button until the status LED at the top of the remote changes from red to green.

  • Type in the 4-digit or 5-digit code listed below using the number buttons. Additional codes may be found in the remote manual.

  • Most likely code

If the code is entered correctly, the status LED will flash green twice. If the status LED blinks red, then green the code was not entered correctly. Check that you are entering the correct code and try again.

Use the remote to operate your TV (use Power, VOL, etc.)

If these steps don’t work, try another 4-digit or 5-digit code and repeat the above.

How to Pair and Program Your Xfinity Voice Remote

Find Manufacturer’s setup code here :    4 digit code5 digit code for your TV then follow the instructions listed below

Simple Steps to Program Your Xfinity Remote

Step 1 : Turn on your TV and set-top box.
Step 2 : Press the Setup button on your remote until the LED at the top of the remote changes from red to green.
Step 3 : Enter the universal remote code from the TV codes lookup tool using the number buttons on the remote.
Step 4 : The LED should flash green twice when the code is entered.
Step 5 : Press the TV Power button on the remote.
Step 6 : If the TV turns off, you have successfully programmed your remote to control your TV.


How To Program X1 Remote Control to Your TV and Audio Device

If you can’t find the code that works for your TV after following the steps above:

Step 1 : Press and hold the Setup button on the remote until the LED at the top of the remote changes from red to green.
Step 2 : Press 9-9-1 on the remote. The LED should flash green twice.
Step 3 : Press the CH ^ button multiple times until the TV turns off.
Step 4 : After the TV turns off, press Setup.
Step 5 : Press the TV Power button on the remote. If the TV turns on, you have successfully programmed your remote to control your TV.

Troubleshoot Xfinity Remote

If you have an Comcast Xfinity remote that is not responding or working as expected when you press buttons on the remote, follow the steps below to troubleshoot.

Xfinity Remote Buttons are not responding

  1. Press a button on the remote:
  2. If the LED does not flash at all, replace the batteries and try again.
  3. If the LED flashes red five times on any button press, this is an indication that the batteries are very low and should be replaced.

Try Factory Reset of Xfinity Remote with a Setup Button (XR11)

If the buttons on your Voice Remote (model XR11) are still unresponsive, you may need to perform a factory reset. To perform a factory reset:

  1. Press the Setup button until the LED at the top of the remote changes from red to green.
  2. Press 9-8-1.
  3. The LED will blink green twice to indicate that the remote was reset.

The factory reset unpairs your remote and TV Box, so you'll need to re-pair

Factory Reset the Xfinity Voice Remote without a Setup Button (XR15)

If the buttons on your Voice Remote (XR15) are still unresponsive, you may need to perform a factory reset. To perform a factory reset:

  1. Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
  2. Press 9-8-1.
  3. The LED will blink blue three times to indicate that the remote was reset.

Disconnecting Your Xfinity Voice Remote from TV

Once a remote is setup, it won’t work with any other TV until you break pairing connection. 

Follow below instructions for xfinity remotes with a Setup button:

  1. Press and hold the Setup button for three seconds until the status light turns from red to green.
  2. Enter 9-8-1 on the remote. If the status light blinks green twice, remote is disconnected from TV.

For remotes without a Setup button, with number keys (XR15 Xfinity X1 or Flex Voice Remote):

  1. Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
  2. Enter 9-8-1 on the remote. If the status light blinks blue twice, Now Comcast xfinity remote is disconnected from TV. Some people also call the remote connection with TV as pairing. 

your all set to connect your remote to a new TV Box, and also to a different TV if you’d like. When aimed directly at the original X1 TV Box, it’ll still control that, too.