Philips Soundbar Remote Control Codes

Philips Soundbar 4 Digit Remote Control Codes:
Using a Universal Remote Control? Try the 4 digit codes first…
0729
1798
1805
0296
1216
1296
1116
1316
0216
0177
0083
0983
0084
0184
0277
0377

Philips Soundbar 5 Digit Remote Control Codes:
Using a CAB or SAT Remote Control? Try the 5 digit codes first…
32459
32311
30189
20081
31266
20035
20618
20739
11454
10054
10037
10690
11483

The above codes have shown to work with Philips soundbar models CSS2133B/F7, B5/37 Fidelio, HTL2163B, HTL3110B/F7, HTL2101A/F7, HTL7180/F7, HTL4115B, HTL2101/F7, HTL9100/12, and CSS2123B/F7.

If these remote codes do not work, try the code search on your CAB or SAT remote…

Using Xfinity? Use the remote code 32459 or 32311.
The volume will work with the AUX button but not the power, To fix this…
To make volume buttons work for the Philips soundbar when remote is in CABLE mode:
-Push the TV button once
-Push and hold the Setup button on the remote until the TV button blinks twice
-Then enter 9 9 3 using the number buttons on the remote
-The TV button will blink 2 times
-Press and release the AUX button one time
-The AUX button will then flash 2 times
-Turn your Television speakers OFF or down
-Push the CABLE button one time
NOTE: The volume button will control the volume of the Philips soundbar but not the volume for the Television (The power button will not turn off the Philips soundbar)

Code Search using silver Comcast remote with a red OK/Select button:
-Turn on your Philips soundbar
-Press Aux once
-Press and hold Setup until the key blinks twice
-Release Setup
-Enter 9 9 1 3
-The Aux key will blink twice
-Press Power and aim the remote control at the Philips soundbar
-Press CH+ until the sound bar turns off
NOTE: In the code search mode, the remote control will send IR codes from its library to the selected device.
-Press Setup once to lock in the code
-The Aux key will blink twice

DIRECTV or ATT with DIRECTV Remote Control:
-Turn Philips Soundbar ON
-Volume up but muted
-AV1 or AV2
-Press and hold MUTE and SELECT for 2 blinks
-Enter 9 9 1 and wait 2 blinks
-Enter 3
-Press and release VOL UP
-Point the remote at the Philips soundbar and keep pressing and releasing the CH UP key
-When the volume changes, press SELECT to lock in code.

If DirecTV remote controls the power of the Philips soundbar but not volume, try this:
-AV1 or AV2
-Press and hold MUTE & SELECT
-Wait for 2 blinks and release
-Enter 9 9 3
-Press SELECTcodes, control, philips, remote, sound bar, soundbar, universal