LG DVD Player Remote Control Codes

A LG DVD player can be controlled with any universal remote if you have the correct programming guide and the correct remote codes. If the codes below do not work with your LG DVD player, please leave a comment below with the model number of your remote control and DVD player and we will find you the correct remote code.

 LG DVD Player 4 Digit Remote Control Codes:

0591
0741
0571
0801
1906
0869
1983
2039
2270
2297
2303
2339
2352
2363
2368
2371
2418

 

ONN Universal remote codes for LG DVD

2635

4285

3915

2335

2555

2565

0205

0635

1565

2925

3785

3885

Direct Code Programming Instructions

Using the code(s) provided above, program the remote control directly using the following steps.

1. Enter Setup Mode

Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.

 

NOTE: The red light with either be a small light at the top of the remote or the power on/off button.

2. Press the device type button

Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.

 

NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.

3. Enter the device code

Use the number buttons on the remote to enter the first code shown above. The red light will turn off after entering the fourth digit.

4. Tests the results

Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.

5. Repeat this process for your other devices