Canon Camera Remote Release Instructions

"3 Ft. Remote Release Instructions Features: This cord allows a camera to be triggered from a distance up to 3 ft away. Installing the Cord • Plug the cord into the remote release socket on the camera. Please refer to the instruction manual for the location. Using the Cord • Momentary Position: Turn the camera on. Press the button in slightly and the camera will prefocus. Continue pressing the button in to release the camera. • Continuous Position: Push the button up revealing the orange line. The camera shutter will stay open (in the B position) or continue to make exposures until the button on the remote release in slid back to the momentary position. Models Available: DL-1480 For Canon EOS Rebel Series 3.5 Mini-plug DL-1482 For Canon 3 Pin Series 3.5 Mini-plug DL-1484 For Nikon D70, D80S Series (1 Pin) DL-1486 For Nikon D100 D200 D2X D2Xs Series (10 Pin) (Other models may become available after this printing.) DL-1490 For Pentax DL-1492 For Sony A100 DL-1480 Series Standard Style 1 Year Limited Warranty. Dot Line Corp. warrants that if the accompanying product proves to be defective to the original purchaser in material or workmanship within 1 year from the original retail purchase, Dot Line Corp. will, at its option, either repair or replace same without charge (but no cash refund will be made). What you must do to enforce the warranty : You must deliver, mail or ship the product together with the original bill of sale, to: Dot Line Corp. 9420 Eton Ave., Chatsworth, CA 91311 Phone 1-800-423-2624 Fax 818-700-9797. Limitation of Liability and Remedies : This warranty is void if any defects are caused by abuse, misuse, negligence or unauthorized repairs. All liability for incidental or consequential damages is specifically excluded. The company shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other incidental, consequential, special or punitive damages arising from the use of, or inability to use, this product, whether arising out of contract, negligence, tort, or under any warranty, even if the company has been advised of the possibility of such damages. The Company’s liability for damages in no event shall exceed the amount paid for the product. The Company neither assumes nor authorizes anyone to assume for it any other liabilities. Some states do not allow for the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Marketed exclusively by: Dot Line Corp. 9420 Eton Ave. Chatsworth, CA 91311 818-700-9997 • Fax 818-700-9797 Product Made in China © Dot Line Corp. 2007 These Instructions are for DL-1480 Series Remote Release Cords. Specifications are subject to change. Printed June 2007. Momentary Position Continuous Position For Canon EOS and Pentax For Canon 3 PIN For Nikon 1 Pin For Nikon 10 Pin (Other models may become available after this printing.)