Programming Instructions for COX Remote Control

  1. Search for your brand of TV from the list 

  2. Turn on the TV

  3. Press the TV key and then let go off the TV key

  4. Press and hold the MUTE and SELECT keys at the same time

  5. Do this until the TV key blinks 2 times and then let go of both keys

  6. Put in the 4 digit TV remote code for your TV brand

  7. Press the POWER key to to see if the TV turns OF

  8. If the TV turned OFF then you have the exact code needed for your TV and it is saved in the remote

If your Television did not turn off… simply repeat the steps by trying each code listed for your TV.

Second way to program the remote if using COX Remote
Turn on the TV or Device you need to program and point the remote at the device when performing setup.

  1. Press and hold MUTE & SELECT keys until the mode key blinks 2 times.
  2. Press the MODE key for the type of device you are setting up.
  3. Find the device type and the brand in the chart here.
  4. Press and hold the correct DIGIT key.
  5. Let go of the key when the device turns OFF and setup has finished.